8605931 - Laserfiche WebLink

Home Browse Search

Onsite Permit 555-18-004425-PRMT Page 5 of 6 Schedule Inspections online at www.buildingpermits.oregon.gov or by calling: 1-888-299-2821 or 503-588-5147 When calling for an inspection,use IVR Number:555054493034 Date,issued:-7113118 ^ �m • Expiration date 7/13/19 SE Work description NEW ATT INSTALL.FOR 4 BDRM RES • .-`,$:, f..,._wc,.r • �.... .� -Y nx.,x . , .,#io`Y`%9x 6 . 5... £ ,.�,._ ro. ��a Conditions of approval accessible for inspection. The electrical inspection includes the connections to the pump and alarm in the dosing tank,the wiring in the trench and the connections in the structure. The effluent pipe must have 18-gauge minimum green tracer wire or green metallic tape placed along the line. OBSERVE ALL SETBACKS AND SEPARATION DISTANCES as required by the DEQ rules. A copy of the DEQ setback requirements is available online at http://www.oregon.gov/deq/Residential/Pages/Onsite.aspx under Rules: Division 71:Table 1 and in our office. MAINTAIN PERMANENT ACCESS to septic tank for pumping and service.The septic tank should be pumped and inspected by a licensed septic tank pumping service before sludge and scum accumulations reach 30%of the tank liquid operating volume. Pumping every 3 to 5 years is an average interval. THE APPROVED SEPTIC SYSTEM AREA MUST BE PROTECTEDfrom any vehicular traffic, livestock and farming activities. Other activities such as excavating or filling,driveway placement, paving or other similar activities that alter the natural soil conditions will adversely affect the soil and the septic system function and lead to premature system failure. The area must not be subjected to excessive saturation due to artificial drainage of ground surfaces,driveways,building downspouts or other sources. The areas of the initial septic system and the future repair system must both be protected. 7/13/18:8:47:31AM Page 5 of 6 ONS_OnsitePermitpr