PC DECISION (9) - Laserfiche WebLink

Home Browse Search

propriate lot sizes for lots using subsurface disposal of sewage. Lot size and dimensions shall be as prescribed in the corresponding zone. In the UD zone, MCC 16.15.130(A) states: A subdivision, residential planned development or other residential development involving the division of land into 4 or more lots intended to be occupied by dwellings or mobile homes may be considered on property in the UD zone if 1) public sewer and water will be available at the time of development, 2) the development complies with the requirements of the RS zone, and 3) the applicable comprehensive plan designation allows residential development of the type and densityproposed. MCC 16.02.120 contains the lot area and dimension standards in the RS zone are found in MCUZO 2.12 and include: (a) Lot Area: The minimum lot area for a single family dwelling in a subdivision approved after the effective date of the Ordinance, or a mobile home on a mobile home subdivision lot approved after the effective date of this ordinance, is 4, 000 square feet when located within the Salem/Keizer Area Urban Growth Boundary. In all other cases lots shall be a minimum of 6, 000 square feet. (See Chapter 27 for density limitations). (b) Lot dimensions, single family: Except as provided in Section 26.800 for Planned Developments, the average width of a lot shall be at least 60 feet; provided that within the Salem/Keizer Urban Growth Boundary the average width of a lot shall be at least 40 feet, and the average depth of a lot shall be at least 70 feet. Public water and sewer service are available from the City of Salem. All of the proposed lots exceed the 4,000 square foot minimum lot size. In addition, they exceed the average 40 foot width standard and 70 foot average depth standard. As previously noted the property is designated single family residential in the SACP and single family dwellings are allowed in that designation. 16.33.420 CURVED FRONT LOT LINES. When front lot lines are on a curve or arc, the front line distance shall be indicated on the final plat by bearing and chord distance. The final plat will be required to meet all survey requirements. 16.33.440 LOT LINE. Side lot lines shall be as close to right angles to the front street line as practicable. Unless otherwise approved, rear lot lines shall be not less than one-half the width of the front lot lines. The site plan submitted for the proposal demonstrates that these standards will be met 9. Sewaee, water, and utilities: These standards are listed in MCC 16.33.460 through 16.33.560 and include: 16.33.460 SEWAGE DISPOSAL. All lots or parcels shall be served by an authorized sewage disposal system. Subsurface sewage disposal for individual parcels shall meet the requirements of the Department of Environmental Quality (DEQ) and the Marion County building inspection division. Those subsurface sewage systems that are used by a community, sanitary district, industry, or incorporated area must be authorized by the Department of Environmental Quality (DEQ) via the Marion County building inspection division. Installation and maintenance shall be in accordance with the Department of Environmental Quality's regulations and requirements. The commission, director, or hearings officer may require connection to an existing sewage collection and treatment system regardless of lot suitabilityfor subsurface disposal if the commission, director or hearings officer deems it necessary and provided the connection is available. The lots will be served by the City of Salem sewage disposal system. 16.33.480 WATER SUPPLY. All lots or parcels shall be served by an authorized public or private water supply system.