BUILD - 1616006 - Laserfiche WebLink

Home Browse Search

Phone: (503) 58,9-1727 Fax: (503) 589-!728, POST FRAME BUILDING CONSTRUCTION NOTES Project No: Date: Client: Owner: Address: 99-241 May 18,1999 Kelly Pdnce Kelly Pdnce 12175 W. Stayton Rd. ~//.~/~/[~,f~,aj~' Stayton, OR 97325 u/ZAW.,O~, C~/~ EXPIRES: ' ~ ~, I ~'~ 1. All concrete rc shall be 2500 psi minimum at 28 days. The concrete shall be mixed in the correct proportions prior to placement. No special inspection is required. All framing lumber shall be at least the minimum noted on the drawings. Lumber not specifically called out may be Standard or better. No. 2 DOUG-FIR may be substituted for No. 2 HEM-FIR. 3. Insure that ALL lateral bracing required by the manufacturer of the pre-engineered trusses have been installed in accordance with the manufacturer's instructions. 4. Install the posts to the depth given in the drawings. Install a 6' thick (min) concrete pad in each posthole. The posthole diameter shall be as noted in the drawings. The posts shall be cantered on the footings. The contractor shall insure that the backfill in the postholes is cast against undisturbed soil. 5. If the drawings specify concrete backfill in the postholes, install (10) 20d galvanized nails 2' deep into two opposite post faces on the embedded area of the post. If the drawings specify granular backfill in the postholes, the backfill shall be 518" to 3/4' (-) gravel or crushed rock. The contractor shall insure that the backfill is saturated prior to backfilling and is compacted after each 6" lift. If the drawings specify natural backfill in the postholes, the backfill shall be well- graded native soil (free from all organics and large cobbles). The contractor shall insure that the backfill is saturated prior to backfilling and is compacted after each lift. 8. If the drawings specify sand backfill in the postholes, the contractor shall insure that the sand is saturated prior to backfilling and is compacted after each 6' lift. 9. Install all steel sheathing to the interior framing members (girts and purlins) per the Typical Screw Schedule given on the Standard Details drawing unless noted otherwise.