BUILD - 1513472 - Laserfiche WebLink

Home Browse Search

BUILDING PERMIT DATE/TIME 07/06/98 15:50 TYPE Resident. addition/alteration OCCUPANCY CONSTTYPE V-N UGB: SITE: FD PERMIT NO 98-04901 STATUS ISSUED ISSUED 07/06/1998 TO EXPIRE 01/02/1999 PAGE 4 service, repair and replacement without removing permanent construction. Unless otherwise specified, not less than 30 inches of working space and platform shall be provided in front of the controm side to service the appliance. [Section 1205.1] INSTALLATION OF MEAT1NG and cooling appliances shall conform to the conditions of their listing and label and the manu- facturer's installation instructions. The manufacturer's operating instructions shall remain attached to the appliance. Have the installation instructions available for the Building Inspector at the time of inspection. [Section 1205.1] The factory built firplace shall be installed in accordance with their listing and the manufacturer s installtion instructions. It shall have a hearth extension of not less than 3/8" thick, extend not less than 16" in front of and not less 8" beyond each side of the fireplace opeing, All clearances to combustibles shall be as listed in the instal- lation manual. Sec. 1004,1 Combustion air needs to be provided the exterior or area freely communicating with the exterior. The combustion air passageway shall be a minimum of 6 square inches and not more than 55 square inches, It shall terminate within 24" and shall be closeable. Sec. 1006 EXTERIOR JOINTS around windows and door frames, between wall cavities and window or door frames, between wall and foundation, between wall and roof. between wall panels, at penetrations or utility services through walls, floors and roofs and all other openings in the exterior envelope shall be sealed in a manner approved by the Building Official. {E401,8,2] 19. 20. 21.