Laserfiche WebLink
g. Percent Elongation at Yield (ASTM D882): <br /> 1) Base Film:7"/ (MD). <br /> 2) Coated Film: 9%(MD). <br /> h. Graves Tear Resistance(ASTM D1004): <br /> 1) Maximum Force(Ibs): <br /> a) Base Film: 28(MD)/28 (TD). <br /> b) Coated Film: 28(MD)/28(TD). <br /> 2) Maximum Extension(in): <br /> a) Base Film: 0.45(MD)/0.65(TD). <br /> b) Coated Film: 0.55(MD)/0.55(TD). <br /> 3) Graves Area Tear Resistance (lbs%): <br /> a) Base Film: 900(MD)/1,200(TD). <br /> b) Coated Film: 900(MD)/1,100(TD). <br /> i. Puncture Propagation Tear Resistance(ASTM D2582): <br /> 1) Coated Film: 6 lbf(MD)/7 lbf(TD). <br /> j. Puncture Strength (ASTM D4830): <br /> 1) Coated Film: 140 lbf. <br /> 2. Uniformity: No noticeable pin holes,streaks,thin spots, scratches, banding or <br /> other optical defects. <br /> 3. Variation in Total Transmission across the width: Less than 2 percent over the <br /> average at any portion along the length. <br /> 4. Identification: Labeled as to Manufacturer as listed in this Section. <br /> 5. Solar Performance Properties: Film applied to 1/4 inch(6 mm)thick clear <br /> glass. <br /> a. Visible Light Transmission (ASTM E 903): 87 percent. <br /> b. Ultraviolet Transmission(ASTM E 903): Less than 0.5 percent. <br /> 41110 6. Impact Resistance for Safety Glazing: Tested on 1/4 inch (6 mm)annealed <br /> glass. <br /> a. Safety Rating (CPSC 16 CFR, Part 1201): Category II (400 tt.Ibs). <br /> b. Safety Rating (ANSI Z97.1): Class A, Unlimited Size. <br /> 7. Impact Resistance and Pressure Cycling: Film shall pass impact of Small <br /> Missile"A"and withstand subsequent pressure cycling(per ASTMs E 1996 <br /> and E 1886)at+/80 psf Design Pressure with use of 3M Impact Protection <br /> Adhesive. Film applied to 3/16 inch(4.8 mm)tempered glass. <br /> 8. Blast Hazard Mitigation: <br /> 9. Independent testing with results from high explosive arena blast or shock tube <br /> testing: <br /> a. GSA Rating of"2"/ASTM F1642"Minimal Hazard"with blast pressure <br /> of 7 psi and 44 psi'msec blast impulse, on 1/4 inch(6 mm)annealed <br /> single pane glass and 3M Impact Protection Profile Attachment system. <br /> b. GSA Rating of"2"/ASTM F1642"Minimal Hazard"with blast pressure <br /> of 7 psi and 42 psi*msec blast impulse,on 1/4 inch(6 mm)tempered <br /> single pane glass and 3M Impact Protection Profile Attachment system <br /> c. GSA Rating of"2"/ASTM F1642"Minimal Hazard"with blast pressure <br /> of 7 psi and 42 psi*msec blast impulse, on 1/4 inch (6 mm)annealed <br /> single pane glass and 3M Impact Protection Adhesive Attachment <br /> system <br /> d. GSA Rating of"2"/ASTM F1642"Minimal Hazard"with blast pressure <br /> of 7 psi and 42 psi*msec blast impulse, on 1/4 inch(6 mm)tempered <br /> single pane glass and 3M Impact Protection Adhesive Attachment <br /> system <br /> e. GSA Rating of"2"/ASTM F1642"Minimal Hazard"with blast pressure <br /> of 8 psi and 60 psi*msec blast impulse, on 1 inch (25.4 mm) annealed <br /> double pane glass and 3M Impact Protection Profile Attachment <br /> L system <br /> f. GSA Rating of"2"/ASTM F1642"Minimal Hazard"with blast pressure <br /> 08 87 16-8 <br />