Laserfiche WebLink
1.8 PROJECT CONDITIONS <br /> A. Maintain environmental conditions(temperature, humidity, and ventilation)within <br /> limits recommended by manufacturer for optimum results. Do not install products <br /> under environmental conditions outside manufacturer's recommended limits. <br /> 1.9 WARRANTY <br /> A. At project closeout, provide to Owner's Representative an executed current copy of <br /> the manufacturer's standard limited warranty against manufacturing defect,outlining <br /> its terms, conditions, and exclusions from coverage, <br /> B. In order to validate warranty, installation must be performed by an Authorized 3M <br /> dealer.Verification of Authorized 3M dealer can be confirmed by submission of <br /> active 3M dealer code number. <br /> PART 2 PRODUCTS <br /> 2.1 MANUFACTURERS <br /> A. Acceptable Manufacturer 3M Commercial Solutions,which is located at: 3M Center <br /> Bldg.220-12-E-04;St. Paul, MN 55144-1000;Toll Free Tel: 888-650-3497; Tel: <br /> 651-737-1081; Fax:651 737 8241; Email: request info(tdiohnson3(o)mmm.com); <br /> Web: <br /> www.3m.com/3M/en US/architectural-design-us/7utm medium=redirect&utm sourc <br /> e=vanity-url&utm campaign=www.3M.com/AMD <br /> www.3m.com/3M/en US/building-window-solutions-us/ <br /> B. Substitutions: Not permitted. <br /> C. Requests for substitutions will be considered in accordance with provisions of <br /> Section 01 60 00-Product Requirements. <br /> 2.2 CLEAR MICROLAYERED SAFETY AND SECURITY WINDOW FILM <br /> A. 3M Scotchshield Ultra S600 Safety and Security Window Film. Optically clear <br /> microlayered polyester film, nominally 6 mils(0.006 inch)thick,with a durable acrylic <br /> abrasion resistant coating over one surface and a pressure sensitive adhesive on <br /> the other. The film is clear and does not contain dyed polyester. The adhesive is <br /> pressure-activated, not water-activated, and forms a physical bond, not chemical <br /> bond,to the glass.The film is microlayered with both plastic and ductile polyester <br /> layers for tear resistance, <br /> 1. Physical/Mechanical Performance Properties(nominal): <br /> a. Film Color:Clear. <br /> b. Film Thickness(excluding coatings or adhesive liner): Nominal 6 mils <br /> c. Tensile Strength(ASTM D882): <br /> 1) Base Film: 32,000 psi (MD)/32,000 psi(TD). <br /> 2) Coated Film: 32,000 psi(MD)/32,000 psi(TD). <br /> d. Break Strength(ASTM D882): <br /> 1) Base Film: 190 lb/In(MD)/190 lb/in (TD). <br /> 2) Coated Film: 210 lbfin (MD)/210 lb/in (TD). <br /> e. Percent Elongation at Break(ASTM D882): <br /> 1) Base Film: 110% (MD)/100% (TD). <br /> 2) Coated Film: 136% (MD)/ 115% (TD). <br /> f. Yield Strength: <br /> 411/ 1) Base Film: 12,000 psi(MD). <br /> 2) Coated Film: 15,000 psi(MD). <br /> 08 87 16-7 <br />