Permit - 1287288 - Laserfiche WebLink

Home Browse Search

Plan Review M25-94-2227C Blazer Industries No modification to this structure shall be commenced without the approval of the design engineer, the local building official and the l:'refabricated Structures Section of the Building Codes Division. Foundation systems, marriage connections of multiple component units, site work done outside of the confines of the stracture (plumbing, electrical, gas piping, and utility connections) are the responsibility of the local building deparunent having site jurisdiction. REFER. TO APPROVED PLANS FOR NOTES PF.~ TO IltlS PARTICULAR PROJECT. FOR ELECTRICAL INSPECTIONS CALL (503)373-1239 or 373-1315. I/~SPECTIONS REQI. JIREn: COVER: .X FINAL: X *l-hr...naffing (~ 1-hr. occupancy wall and 1-hr, .damper. *Split limits to 10-5/8" Submitted plans are acceptable subject to the following: A one-hour rated damper shall be provided @ duct penetration through one-hour occupancy separation per OSSC 4306(j)1. Unless otherwise specified in the hWAC installation standards, not less than 30 inches of clearance shall be provided in front of appliance for ~rvlceable work space in accordance with OSMSC 505. In accordance with Plans Sheet 2a, Section B, double trusses are proposed as framing members for 1-hour occupancy separation wall above ceiling. In accordance with one-hour assembly utilized, provide vertical framing at 24" o.c~ max. l~ndwall shear design proposed at endwall with door and 2 ea. windows indicates fastening siding with 6d at 2" o.c. In accordance with OSSC Table 25~K-I, Footnote 2, 3-inch nominal framing shall be provided and nails at 2" o.c. shall be staggered in shearpanel locations. Those portions of supply plenum and ducting above the insulation envelope in the ceillng within aa unconditioned space shall be provided with minimum R~$ duct insulation per OSSC Table 53-P, Path 1.