Laserfiche WebLink
Onsite Permit 555-21-006090-pRMT Page 2 of 3 <br /> Schedule or track inspections at www.buildingpermits.oregon.gov <br /> Call or text the word "schedule"to 1-888-299-2821 use IVR Number:555030160033 <br /> Schedule using the Oregon ePermitting Inspection App,search"epermitting"in the app store <br /> n ,IN TALL.PhrTit ,'B RM M . <br /> Special Requirements <br /> Stake out required: No <br /> Groundwater type: Temporary Groundwater depth: <br /> Pump to drainfield reqd: 12 in.s <br /> Yes Filter fabric on top of drain media: Yes <br /> Conditions of approval <br /> •This permit is for the installation of an Alternative Treatment Technology(ATT)system and is to be installed <br /> by a person certified by the system manufacturer in accordance with OAR 340-071-0600 and 0650.See <br /> Alternative Treatment Technology rules at OAR 340-071-0345. <br /> -ATT treatment standard 1 required. <br /> -The owner of an ATT system must maintain a contract with a maintenance provider certified by the <br /> manufacturer to inspect,adjust and maintain the onsite system.The maintenance provider must submit an <br /> annual report and annual evaluation fee. <br /> -Dry soil installation only(June 1 —October 1 unless otherwise authorized by the agent). <br /> •Vehicular traffic and livestock must be restricted from the system area. <br /> -All roof drains must be directed away from the system <br /> •All tanks must be tested for watertightness and have a water-tight riser to the ground surface.Twenty-inch <br /> minimum diameter if less than 36-in deep.Thirty-inch minimum diameter if greater than 36-in deep.Maintain <br /> access to septic tank for pumping and service. <br /> -The pump and alarm must be wired on separate circuits in the control panel. Pump wiring must comply with <br /> applicable building,electrical,or other codes.An electrical permit and inspection from the Department of <br /> Consumer and Business Services,Building Codes Division,or the municipality with jurisdiction,is required for <br /> pump wiring installation. <br /> •An anti-buoyancy device is required for the septic tank(s)and must be installed as per the manufacturer <br /> installation guidelines. <br /> •A minimum 18-gauge,green jacketed tracer wire or green color-coded metallic tape must be placed on top <br /> of the effluent sewer or pressure transport pipe from tank to drainfield. <br /> •The hydrosplitter must be located at least 6 inches higher than the piping in the highest disposal trench to <br /> ensure that effluent in the top line does not spill back into the hydrosplitter. <br /> • <br /> • <br /> 6/24/21:9:21:02AM Page 2 of 3 <br /> ONS_OnsitePermit_pr <br />