Laserfiche WebLink
COURTHOUSE SQUARE <br />OUTLINE SPECIFICATION <br />PROJECT NO. 9828 <br />July 23, 1998 <br />Page 11 <br />vi. Fifter Fabric: Non-woven polypropylene. Propex 4545 or Mirafi 140N. <br />22. Section 02513, Asphatt Concrete Paving: <br />Description of Work: <br />i. Extent of asphaft concrete paving work consists of plugging patching and in-fill <br />work between new combination cur/gutters and existing paved streets. <br />b. Quality Assurance: <br />i. Qualifications of Asphaft Concrete Producer: <br />(1) Bulk producer regularly engaged in production of hot-mix, hot-laid <br />bituminous concrete, approved by the City of Salem. <br />ii. Requirements of Regulatory Agencies: <br />(1) American Society for Testing and Materials (ASTM), American <br />Association of State Highway and Transportation Officials (AASHTO), <br />Oregon State Highway Division (OSHD), Standard Specifications for <br />Highway Construction, 1984 Edition; City of Salem Standard <br />Construction Specifications (SCS). <br />c. Components: <br />i. All materials shall conform to requirements of SCS Section 306 "Asphalt <br />Concrete Pavement". <br />ii. Use the following SCS bituminous concrete mix classifications for areas required <br />to be paved under this contract: <br />(1) Class B: Finish course for all paved surfaces. <br />(2) Class C: Pavement patching. <br />(3) Bituminous Concrete Mixes: Conform to Section 306 of SCS. Submit <br />job mixes to Architect for review prior to use. <br />(4) Asphaft Cement: AR-4000 grade conforming to AASHTO M226-731, <br />Table III. <br />(5) Tack Coat: RS-1 conforming to ASTM D977-73 for "Emulsified <br />Asphalt", or SSh. in compliance with Federal Specification SS-A-674. <br />(6) Joint Seal: RS-1 or RS-2 conforming to ASTM D977-73 for "Emulsified <br />Asphalt." <br />23. Section 02515, Pedestrian Unit Pavers: <br />a. System Description: <br />i. Horizontal paving units made from clay ceramic materials. <br />b. Quality Assurance: <br />i. System Design Criteria: Tile council of America (TCA) "Handbook for Ceramic <br />Tile Installation." <br />ii. Manufacturing Standards: Equal or exceed requirements of TCA 137.1-1976. <br />Each type and/or color of paver is to be from one source. <br />iii. Reference Standards: American Society for Testing and Materials (ASTM). <br />c. Components: <br />i. General Requirements: Standard Grade, ASTM C627, Cycles 1 through 12. <br />ii. Paver Tile: 8" x 8" x 1/2" and 8" x 8" x 1br~" wire cut pavers; "Dark Ironspot" by <br />Endicot Clay Products, Fairbury, Nebraska. <br />iii. Paver Brick: 4" x 8" x 1/2" and 4" x 8" x 15~" wire cut pavers; "Medium Rose" by <br />