Laserfiche WebLink
.r <br />~ <br />~ <br />U <br />B <br />C. <br />D <br />E. <br />F <br />G. <br />Page: 8 <br />c. Liquid limit and plasticity index for each sieve analysis. <br />Contractor shall request prior to starting work far enough in <br />advance to not cause project delays in the work. <br />d. Field density test on all in place, compacted on-site and imported <br />backfill material and granular material. Number and document <br />location of each density test. <br />e. Other tests deemed necessary by testing laboratory's <br />Geotechnical Engineer, and approved by Owner. <br />CONCRETE REINFORCEMENT: <br />1. Perform reinforcing steel inspection <br />2. Tests and samples as required <br />CAST-IN-PLACE CONCRETE: <br />1. PerForm concrete testing <br />2. Tests and samples as required <br />a. Slump Test <br />b. Concrete test cylinders and compressive strength test <br />c. Concrete air tests <br />d. Obtaining and testing drilled cores from hard concrete <br />PRE-CAST CONCRETE <br />1. Perform concrete testing <br />2. Test and sample as required <br />3. Inspect structural attachment <br />CONCRETE UNIT MASONRY: <br />1. Perform concrete unit masonry inspection and testing <br />2. Tests and Samples required: <br />a. Grout Specimen and compressive strength test <br />b. Mortar specimen and compressive strength test <br />FIELD WELDING <br />1. Perform field welding inspections <br />2. Tests and samples required: <br />a. Visual inspection of all structural field welds <br />b. Ultrasonic testing of all full and partial penetration field welds <br />STRUCTURAL BOLTING <br />1. Perform structural bolting inspection a~d testing <br />