SESPEXIS - 1618863 - Laserfiche WebLink

Home Browse Search

DATE/TIME TYPE OCCUPANCY AUTHORIZATION/MAJOR REPAIR PERMIT 09/21/99 10:59 PERMIT NO 99-07369 SP STATUS ISSUED R-3 ISSUED 09/21/1999 TO EXPIRE 09/20/2000 PAGE 3 that limits the effective soild depth or a water table is present in the soil profile at a depth shallower than allowed for a standard system. The drainfield is installed a at a very shallow depth and fill is placed over the field to provide the earth cover over the system. CAPPING FILL SYSTEMS MAY ONLY BE INSTALLED FROM JUNE I AND OCTOBER 1 or during such times when Building Inspection staff finds soil moisture conditions acceptable. See the attached "CAPPING FILL" information sheet for instructions. Fill material must be evenly graded over the drainfield and crowned at the center to shed rainfall. An EFFLUENT LIFT PUMP MAY BE REQUIRED to install the septic system disposal field in the approved area and at the required depth. Detailed instructions for dosing tank / effluent pump installations are available in our office. The electrical wiring to the pump and alarm must be installed in accordance with the appropriate Electrical Code. The elec- trical work must be done under a Marion County Electrical Permit and must be inspected and approved by a Marion County Electrical Inspector, The work must be left uncovered and accessible for inspection.The electrical inspection includes the connections to the pump and alarm in the dosing tank,the wiring in the trench and the connections in the structure. OBSERVE ALL SETBACKS AND SEPARATION DISTANCES as required by the DEQ rules. The well placement is especially critical and must be located at least one-hundred (100) feet from the approved initial and replacement drainfield areas. A copy of the DEQ setback requirements is available in our office. THE ATTACHED SEPTIC TANK ABANDONMENT FORM MUST BE COMPLETED AND RETURNED TO OUR OFFICE. The septic system installer must complete and sign the form and attach a copy of the receipt from the septic tank pumper for pumping the tank, THIS SYSTEM MUST BE INSPECTED AND APPROVED PRIOR TO BACKFILL When work is complete and ready for inspection, call our Automated Inspection Request line at 373-4427 to request an inspection. Enter the number '801" for a PRE-COVER inspec tion, You may leave a message for the inspector if desired. Be sure the System Record form with the As-Built drawing is on the job or in our office when the inspection is requested An inspection should be completed within seven (7) days.