13010122 - Laserfiche WebLink

Home Browse Search

• TFPB20 • Page 7 of 8 L Care and CENTERLINE BUILDING OF SPRINKLER r STRUCTURE Maintenance WATERWAY The TYCO Model WS Specific Applica- NO MAXIMUM Lion Window Sprinklers must be main- DISTANCE tained and serviced in accordance with \ this section. I % Before closing a fire protection system I main control valve for maintenance WINDOW work on the fire protection system FLOW DIRECTION FRAME that it controls, obtain permission to INDICATED ON shut down the affected fire protection SPRINKLER systems from the proper authorities DEFLECTOR 3'(/6,2 mm) and notify all personnel who may be NO ±1'(25,4 mm) affected by this action. MAXIMUM Sprinklers which are found to be HEIGHT 4'(101,6 mm) leaking or exhibiting visible signs of TO 12'(304.8 mm) FOR GLASS TYPES corrosion must be replaced. OTHER THAN FIRELITE PLUS WS CERAMIC GLASS Automatic sprinklers must never be BY TOP,ALL COMBUSTIBLE painted, plated, coated, or other- 13D" NON-OPERABLE (3,96Im) GLASS WINDOW MATERIALS SHALL MBE INIMUM wise altered afterk sg the factory. MAXIMUM KEPT 2" PRI KLE ED E Modified sprinklers must be replaced. EXPOSED FROM SPRINKLERED FACE Sprinklers that have been exposed to GLAZING INSTALLATION NOTE: OF GLAZING.THIS MAY BE corrosive products of combustion,but HEIGHT POSITION SPRINKLER DONE THROUGH USE OF have not operated,should be replaced WITH FRAME ARMS MINIMUM 3'-0'(D,9 m) if they cannot be completely cleaned ALIGNED PARALLEL PONY WALL by wiping the sprinkler with a cloth or TO GLAZING AND by brushing it with a soft bristle brush. DEFLECTOR FLOW Care must be exercised to avoid ARROW POINTED MODEL WS SPRINKLER 4. damage to the sprinklers - before, TOWARD GLAZING SHOWN ON ONE SIDE OF during, and after Installation. Sprin- GLAZING FOR CLARITY klers damaged by dropping, striking, % wrench twist/slippage,or the like,must t be replaced.Also,replace any sprinkler \ that has a cracked bulb or that has lost liquid from its bulb.Refer to the Instal- lation section for additional information. The owner is responsible for the FIGURE 3D P MODEL WS PENDENTINSTALLATION SIDEWALL SPRINKLER inspection,testing,andmaand of TYPICAL INSTALLATION their me protection system and devices in c with this ledocument, as well as with the applicable standards recognized PA by ina Approval est agency Nfantau, addition atnthesc- tio of to t authjurisdic- tion. orities Contact the installing rg contractorany or product manufacturer regarding any questions. Automatic sprinkler systems are rec- ommended to be inspected, tested, and maintained by a qualified Inspec- tion Service in accordance with local requirements and/or national codes.