13003280 - Laserfiche WebLink

Home Browse Search

4. ASTM E1996/E1886: Small Missile"A", +/-60 psf Design Pressure 5. ASTM E1996/E1886: Large Missile"C", +/-60 psf Design Pressure D. Tear Resistance: 1. Minimum Graves Area Tear Strength of 1,000 lbs%as measured on coated film product,without liner, per ASTM D1004. 2. Minimum Graves Area Tear Strength of 1,200 Ibs%as measured on coated film product, without liner, per ASTM D1004. 3. Minimum Graves Area Tear Strength of 1,100 lbs%as measured on coated film product,without liner, per ASTM 01004 E. Adhesion to Glass: 1. Minimum 8 lbslin peel strength per ASTM D3330(Method A). 2. Minimum 6 lbs/in peel strength per ASTM 03330(Method A). 3. Minimum 6 lbs/in peel strength per ASTM D3330(Method A). 4. Nominal 4 lbs/in peel strength per ASTM 03330(Method A). 5. Nominal 5 lbs/in peel strength per ASTM D3330(Method A). 6. Minimum 2 lbslin peel strength per ASTM D3330(Method A). 7. Nominal 4 lbs/in peel strength per ASTM D3330(Method A). 8. Nominal 4 lbs/in peel strength per ASTM D3330 (Method A). 9. Nominal 5 lbs/in peel strength per ASTM D3330(Method A). 10. Minimum 3 lbs/in peel strength per ASTM D3330(Method A). 11. Nominal 1 lbslin peel strength per ASTM D3330(Method A). F. Flammability: Surface burning characteristics when tested in accordance ASTM E 84, demonstrating film applied to glass rated Class A for Interior Use: 1. Flame Spread Index: no greater than 25. 410, 2. Smoke Developed Index: no greater than 55. G. Abrasion Resistance: 1. Film shall have a surface coating that is resistant to abrasion such that less than 3 percent increase of transmitted light haze will result when tested in accordance to ASTM D 1044 using 100 cycles, 500 grams weight, and the CS1OF Calibrase Wheel. 2. Film shall have a surface coating that Is resistant to abrasion such that less than 3 percent increase of transmitted light haze will result when tested in accordance to ASTM D 1044 using 100 cycles, 500 grams weight, and the CS1OF Calibrase Wheel. 3. Film shall have a surface coating that is resistant to abrasion such that less than 5 percent increase of transmitted light haze will result when tested in accordance to ASTM 0 1044 using 100 cycles, 500 grams weight, and the CS1OF Calibrase Wheel. 4. Film shall have a surface coating that is resistant to abrasion such that a nominal 5 percent increase of transmitted light haze will result when tested in accordance to ASTM D 1044 using 100 cycles, 500 grams weight, and the CS1OF Calibrase Wheel. 5. Film shall have a surface coating that is resistant to abrasion such that a nominal 3 percent increase of transmitted light haze will result when tested in accordance to ASTM D 1044 using 100 cycles, 500 grams weight, and the CS1OF Calibrase Wheel. 6. Film shall have a surface coating that is resistant to abrasion such that less than 2 percent increase of transmitted light haze will result when tested in accordance to ASTM D 1044 using 100 cycles, 500 grams weight, and the CS1OF Calibrase Wheel. H. UV Light Rejection: 1. Minimum of 99.9% UV light rejection (300-380 nm),per ASTM E903, as 08 87 16-4