Laserfiche WebLink
13470 Lakewood Dr. N~, Aurora <br />June 1, 1994 <br />Page 2 <br /> <br />10. <br /> <br />11. <br /> <br />Purlin bracing may be used as a support when determining allowable <br />rafter spans. The angle between the purlin brace and a horizontal plane <br />shall b~ not less than 45 degrees. Th~ lowe~ and Of the purlin brace <br />shall be supported by a load bearing wall. (R-701.1) <br /> <br />R-38 insulation requires a minimum of 12" depth to retain a R-value of <br />R-38. If high density insulation is used, 10" depth is required or as <br />required by the insulation manufacturer. <br /> <br />Approval as a result of this plan review or an inspection shall not be <br />construed to be an approval of a violation of the provisions of the dwelling <br />code or of other ordinances of the jurisdiction. Reviews or inspections <br />presuming to give authority to violate or cancel the provisions of the <br />dwelling code or of other ordinances of the jurisdiction shall not be valid. <br /> <br />sf <br /> <br />"APPROVED" only when this sheet is attached to plans <br /> <br /> <br />