12022637 - Laserfiche WebLink

Home Browse Search

Onsite Permit 555-22-005281-PRMT Page 2 of 3 Schedule or track inspections at www.buildingpermits.oregon.gov Call or text the word "schedule" to 1-888-299-2821 use IVR Number:555044221320 Schedule using the Oregon ePermitting Inspection App, search "epermitting" in the app store Date"issued:7/5/22 Expiration date 7J5123 Work description:NEW INSTALL FOR NSFDS BORMM PARCEL#2 2.27 AC ,;!':-;Kr" Special Requirements Stake out required: Yes Groundwater type: Temporary Groundwater depth: 18 in. Pump to drainfield reqd: Yes Filter fabric on top of drain media: Yes Conditions of approval •Capping fill rules at OAR 340-071-0265.Construction must occur in dry soil conditions between June 1 and October 1 unless otherwise approved by the agent.The cap material must be pre-approved by the agent prior to placement. Minimum 10-ft between edge of fill and trench. Drainfield area must be scarified. Contact between native soil and fill must be mixed. Final cap to be seeded and or landscaped to prevent erosion. Protect from livestock and vehicular traffic. •Serial distribution.The cap material must be evenly graded to a final depth of 16-inches over the drain media. •All roof drains must be directed away from the system •The system must be installed by the property owner or a licensed sewage disposal business (installer). •All tanks must be tested for watertightness and have a water-tight riser to the ground surface. Twenty-inch minimum diameter if less than 36-in deep.Thirty-inch minimum diameter if greater than 36-in deep. Maintain access to septic tank for pumpingand service. •Meet all required setbacks •The system must be installed in the area approved during the site evaluation and in accordance with the construction plan approved by the agent, including any changes made by the agent. •All work is to conform to OAR 340, Division 71 and 73. Make no changes in system location or specifications without approval by the agent. •An anti-buoyancy device is required for the septic tank(s)and must be installed as per the manufacturer installation guidelines. •A minimum 18-gauge, green-jacketed tracer wire or green color-coded metallic tape must be placed on top of the effluent sewer or pressure transport pipe from tank to drainfield. •Serial distribution, each trench bottom to be level and on contour. Use Drop box(es). 7/5/22:3:43:08PM ONS_OnsitePermit_pr