12022589 - Laserfiche WebLink

Home Browse Search

E)(PIRED Page e2of3 Onsite Permit 555-21-01 1 231-PRMT Schedule or track inspections at www.buildingpermits.oregon.gov Call or text the word "schedule" to 1-888-299-2821 use IVR Number:555095553137 Schedule using the Oregon ePermitting Inspection App, search "epermitting"in the app store Q:. 99.. Special Requirements Groundwater type: Permanent Groundwater depth: 66 in. Pump to drainfield reqd: Yes Filter fabric on top of drain media: N/A Other special rqmt: Sweeps must be installed at the end of all pressure laterals,they must come to the surface with a threaded cap for maintenance Conditions of approval •Pressurized distribution rules at OAR 340-071-0275. Install sweep elbows at ends of lateral piping with acceptable threaded plugs or caps.Minimum head of 5-ft at remotest orifice, less than 10%variation. •This permit is for the installation of an Alternative Treatment Technology(ATT)system and is to be installed by a person certified by the system manufacturer in accordance with OAR 340-071-0600 and 0650.See Alternative Treatment Technology rules at OAR 340-071-0345. •Vehicular traffic and livestock must be restricted from the system area. •An electrical permit and inspection from the Department of Consumer and Business Services, Building Codes Division,or the municipality with jurisdiction, is required for pump wiring installation. •Filter fabric required over drain media(rapidly permeable soils). •Dry soil installation only(June 1 —October 1 unless otherwise authorized by the agent). •The owner of an ATT system must maintain a contract with a maintenance provider certified by the manufacturer to inspect,adjust and maintain the onsite system.The maintenance provider must submit an annual report and annual evaluation fee. •ATT treatment standard 1 required. •The ATT system must be designed to prevent untreated waste from passing into the absorption field if the treatment system malfunctions. •In addition to the As-Built and Materials List, a Start-Up checklist from the ATT maintenance provider is required to Final this permit. •The pump and alarm must be wired on separate circuits in the control panel. Pump wiring must comply with applicable building, electrical,or other codes. •Install the pump and system components in accordance with the approved pump curve and specifications. •A minimum 18-gauge,green-jacketed tracer wire or green color-coded metallic tape must be placed on top of the effluent sewer or pressure transport pipe from tank to drainfield. •All work is to conform to OAR 340, Division 71 and 73. Make no changes in system location or specifications without approval by the agent. •For product approval information and manufacturer installation requirements see DEQ website at: http://www.oregon.gov/deq/Residential/Pages/Onsite.aspx 11/18/21:3:32:29PM ONS_OnsitePermit_pr