11857431 - Laserfiche WebLink

Home Browse Search

Onsite Permit 555-23-005648-PRMT-01 Page 2 of 3 Schedule or track inspections at www.buildingpermits.oregon.gov Call or text the word "schedule" to 1-888-299-2821 use IVR Number:555045744801 Schedule using the Oregon ePermitting Inspection App, search"epermitting"in the app store �,r t7i� Date issd.8114f23 � a 4. � icptration C3124: r.F�a��s. k .. Work d tIon I N E =�I PLACE.3 BDRM MD�ITI- 3 BDR Fl ;,�ry �� • �y 8 4 , �=f ,F .. ,.dNA Conditions of approval •The system must be installed by the property owner or a licensed sewage disposal business (installer). •All tanks must be tested for watertightness and have a water-tight riser to the ground surface.Twenty-inch minimum diameter if less than 36-in deep.Thirty-inch minimum diameter if greater than 36-in deep. Maintain access to septic tank for pumping and service. •Meet all required setbacks All work is to conform to OAR 340, Division 71 and 73. Make no changes in system location or specifications without approval by the agent. •A minimum 18-gauge, green jacketed tracer wire or green color-coded metallic tape must be placed on top of the effluent sewer or pressure transport pipe from tank to drainfield. ▪Effluent sewer.The effluent sewer must extend at least 5 feet beyond the septic tank before connecting to the distribution unit. It must be installed with a minimum fall of 4 inches per 100 feet and at least 2 inches of fall from one end of the pipe to the other. In addition, there must be a minimum difference of 8 inches between the invert of the septic tank outlet and either the invert of the header to the distribution pipe of the highest lateral in a serial distribution field or the invert of the header pipe to the distribution pipes of an equal distribution absorption field. •Header pipe from Distribution or Drop Box must be minimum 4-ft length, level, and bedded. •Equal distribution, all trench bottoms must be at the same elevation. Use Distribution box(es). 8/14/23:1:27:00PM ONS_OnsitePermit_pr