11853070 - Laserfiche WebLink

Home Browse Search

Onsite Permit 555-22-007556-PRMT-01 Page 2 of 3 Schedule or track inspections at www.buildingpermits.oregon.gov Call or text the word "schedule" to 1-888-299-2821 use IVR Number:555085739838 Schedule using the Oregon ePermitting Inspection App, search "epermitting" in the app store 3 ,... q y,,*.u=" =-: -�,•,-� �¢'I rot.,a6 ," +' .9 - - -;'W.«-" =` "Is xt. Media type: Rock/Pipe Media depth: N/A Trench length: N/A Rock above pipe: 6 in. Total rock depth: 12 in. Rock below pipe: 6 in. Max depth: 24 in. Undisturbed soil between trenches: N/A Min depth: 18 in. Capping fills-min depth of fill material: N/A Special Requirements Stake out required: No Pump to drainfield reqd: Yes Filter fabric on top of drain media: N/A Conditions of approval •This permit is for the installation of an Alternative Treatment Technology (ATT) system and is to be installed by a person certified by the system manufacturer in accordance with OAR 340-071-0600 and 0650. See Alternative Treatment Technology rules at OAR 340-071-0345. •ATT treatment standard 1 required. •In addition to the As-Built and Materials List, a Start-Up checklist from the ATT maintenance provider is required to Final this permit. •The owner of an ATT system must maintain a contract with a maintenance provider certified by the manufacturer to inspect, adjust and maintain the onsite system.The maintenance provider must submit an annual report and annual evaluation fee. •Dry soil installation only(June 1 —October 1 unless otherwise authorized by the agent). •The system must be installed by the property owner or a licensed sewage disposal business (installer). •Vehicular traffic and livestock must be restricted from the system area. •Meet all required setbacks •The system must be installed in the area approved during the site evaluation and in accordance with the construction plan approved by the agent, including any changes made by the agent. •For product approval information and manufacturer installation requirements see DEQ website at: http://www.oregon.gov/deq/Residential/Pages/Onsite.aspx •The pump and alarm must be wired on separate circuits in the control panel. Pump wiring must comply with applicable building, electrical, or other codes. An electrical permit and inspection from the Department of Consumer and Business Services, Building Codes Division, or the municipality with jurisdiction, is required for pump wiring installation. •Install the pump and system components in accordance with the approved pump curve and specifications. •A minimum 18-gauge, green-jacketed tracer wire or green color-coded metallic tape must be placed on top of the effluent sewer or pressure transport pipe from tank to drainfield. •Pressurized distribution rules at OAR 340-071-0275. Install sweep elbows at ends of lateral piping with acceptable threaded plugs or caps. Minimum head of 5-ft at remotest orifice, less than 10%variation. •Filter fabric required over drain media (rapidly permeable soils). 11/3/22:9:45:55AM ONS_OnsitePermitpr