Laserfiche WebLink
Onsite Permit 555-22-002310-PRMT Page 2 of 3 <br /> Schedule or track inspections at www.buildingpermits.oregon.gov <br /> Call or text the word "schedule"to 1-888-299-2821 use IVR Number:555053501430 <br /> Schedule using the Oregon ePermitting Inspection App, search"epermitting"in the app store <br /> Date issued:4/22/22 Expiration date 4/22/23 <br /> Work�description FIRE ,"MAJ_REP: BDRM REPi.23DRM SFD - " ,: ' <br /> cF <br /> Special Requirements <br /> Stake out required: No <br /> Conditions of approval <br /> •Dry soihinstallation only(June 1=October 1_uniess_o_Iherw se_authorized_by_the_agent):-3 <br /> -The system must be installed by the property owner or a licensed sewage disposal <br /> business (installer). <br /> -Vehicular traffic and livestock must be restricted from the system area. <br /> -All roof drains must be directed away from the system <br /> •AII tanks must be tested for watertightness and have a water-tight riser to the ground <br /> surface.Twenty-inch minimum diameter if less than 36-in deep.Thirty-inch minimum <br /> diameter if greater than 36-in deep. Maintain access to septic tank for pumping and service. <br /> -Meet all required setbacks <br /> -The system must be installed in the area approved during the site evaluation and in <br /> accordance with the construction plan approved by the agent, including any changes made <br /> by the agent. <br /> •All work is to conform to OAR 340, Division 71 and 73. Make no changes in system location <br /> or specifications without approval by the agent. <br /> •A minimum 18-gauge,green jacketed tracer wire or green color-coded metallic tape must <br /> be placed on top of the effluent sewer or pressure transport pipe from tank to drainfield. <br /> -Effluent sewer.The effluent sewer must extend at least 5 feet beyond the septic tank <br /> before connecting to the distribution unit. It must be installed with a minimum fall of 4 inches <br /> per 100 feet and at least 2 inches of fall from one end of the pipe to the other. In addition, <br /> there must be a minimum difference of 8 inches between the invert of the septic tank outlet <br /> and either the invert of the header to the distribution pipe of the highest lateral in a serial <br /> distribution field or the invert of the header pipe to the distribution pipes of an equal <br /> distribution absorption field. <br /> -Header pipe from Distribution or Drop Box must be minimum 4-ft length, level, and <br /> bedded. <br /> -Each drainfield trench must be level within a tolerance of plus or minus 1-inch. <br /> -Serial distribution,each trench bottom to be level and on contour. Use Drop box(es). <br /> 4/22/22:10:07:19AM ONS_OnsitePermit pr <br />